Panasonic PT-VX600 - [Text Display]; [Text Change]; [Menu Lock]; [Menu Lock Password]

Note
f The entered password is displayed with "" mark on the screen.
f An error message is displayed on the screen when the entered password is incorrect. Re-enter the correct password.
f If numbers have been used for the security password, the security password will need to be initialized again if the remote
control is lost. Consult your dealer for the initialization method.
[TEXT DISPLAY]
Overlap the security message (text) over the projecting image.
1) Press as to select [TEXT DISPLAY].
2) Press qw to switch the item.
f The items will switch each time you press the button.
[OFF]
Disables the text display.
[ON]
Enables the text display.
[TEXT CHANGE]
Change the text displayed when the text display is enabled by selecting [ON] in [TEXT DISPLAY].
1) Press as to select [TEXT CHANGE].
2) Press the <ENTER> button.
f The [TEXT CHANGE] screen is displayed.
3) Press asqw to select the text, and press the <ENTER> button to enter the text.
4) Press asqw to select [OK], and press the <ENTER> button.
f The text is changed.
[MENU LOCK]
Display the menu by the <MENU> button and set whether or not to enable menu operations.
1) Press as to select [MENU LOCK].
2) Press qw to switch the item.
f The items will switch each time you press the button.
[OFF]
Unlocks menu operations.
[ON]
Locks menu operations.
Note
f When the entered password is incorrect after setting [MENU LOCK] to [ON], the <MENU> button cannot be operated.
f [MENU LOCK] is set to [OFF] at the time of purchase or when [INITIALIZE ALL] is executed.
f When [MENU LOCK] is set to [ON] and then enter the password to release the lock, the unlock state is held until the
projector enters the standby mode.
[MENU LOCK PASSWORD]
Change the menu lock password.
1) Press as to select [MENU LOCK PASSWORD].
2) Press the <ENTER> button.
f The [MENU LOCK PASSWORD] screen is displayed.
3) Press asqw to select the text, and press the <ENTER> button to enter the text.
f Up to 16 characters can be input.
4) Press asqw to select [OK], and press the <ENTER> button.
f To cancel, select [CANCEL].
Attention
f The initial password is “AAAA” at the time of purchase or when [INITIALIZE ALL] is executed.
f Change the password periodically that is hard to guess.
Chapter 4 Settings - [SECURITY] menu
78 - ENGLISH