Adjusting [KEYSTONE]
1) Press asqw to adjust.
f For details, please refer to [KEYSTONE] in [SCREEN ADJUSTMENT] menu. (Æ page 56)
Adjusting [ARC]
Items Operation Adjustment
[H]
Press the q button.
The top and bottom of horizontal line
will be bulge.
Press the w button.
The top and bottom of horizontal line
will be dent.
[V]
Press the a button.
The left and right of vertical line will be
dent.
Press the s button.
The left and right of vertical line will be
bulge.
Note
f One of [KEYSTONE], [CORNER CORRECTION] and [CURVED CORRECTION] setting value is valid. When [KEYSTONE],
[CORNER CORRECTION] or [CURVED CORRECTION] adjustment is nished, you adjust the others, the adjusted value
will be reset.
f Press the <SCREEN ADJ> button on the remote control when the [KEYSTONE], [CORNER CORRECTION] or [CURVED
CORRECTION] screen is displaying, it will switch to the next adjustment screen.
f When the [CORNER CORRECTION] individual adjustment screen is displaying, the individual adjustment screen of the next
corner can also be displayed by pressing the <ENTER> button.
f Correcting up to ±35° for the tilt in the vertical direction and ±35° for the tilt in the horizontal are available for adjustments
with [KEYSTONE]. However, the image quality will degrade and it will get harder to focus with more correction. Install the
projector so that the correction will be as small as possible.
f Screen size will also change when [KEYSTONE] is used to perform various adjustments.
f Aspect ratio of the image size may shift depending on the correction.
[SCREEN ADJUSTMENT]
(For PT-VZ570)
You can correct the trapezoidal distortion and the curved distortion of the projected image.
1) Press as to select [SCREEN ADJUSTMENT].
2) Press the <ENTER> button.
f The [SCREEN ADJUSTMENT] screen is displayed.
3) Press as to select one item to adjust.
[KEYSTONE]
Adjusts when the trapezoid of the projected image is distorted.
[CORNER CORRECTION]
Adjusts when the four corners of the projected image are distorted.
[CURVED CORRECTION]
Adjusts when the linearity is not uniform or the projected image is curved distortion.
Setting
[KEYSTONE]
1) Press as to select [SCREEN ADJUSTMENT].
2) Press the <ENTER> button.
f The [SCREEN ADJUSTMENT] screen is displayed.
3) Press as to select [KEYSTONE].
4) Press the <ENTER> button.
f The [KEYSTONE] individual adjustment screen is displayed.
5) Press as to select one item to adjust.
Chapter 4 Settings - [POSITION] menu
ENGLISH
-
57
To Next Page
Loading...
