Panasonic PT-VX600 - Page 84

Note
f If you use a web browser to control the projector, set [NETWORK CONTROL] to [ON] in [NETWORK]. (
Æ
page 81)
f Do not perform setting or control simultaneously by starting up multiple web browsers. Do not set or control the projector
from multiple computers.
f Change the password rst. (x page 92)
f The administrator rights allow use of all functions. The user rights allow use of [Projector status] (x page 84), conrmation
of the error information page (
Æ
page 85), [Network status] (x page 86), [Basic control] (x page 86), [Advanced
control] (x page 86), and [Change password] (x page 92) only.
f Access will be locked for few minutes when an incorrect password is entered three times consecutively.
f Some items on the projector setting page use the Javascript function of the web browser. The projector may not be able to
be controlled properly if it is set with a browser that does not have this function enabled.
f If the screen for the web control is not displayed, consult your network administrator.
f While updating the screen for the web control, the screen may become white for a moment, but it is not a malfunction.
Description of each item
1
2
3
4
5
6
1 Page tab
Switches pages by clicking this item.
2 [Status]
The status of the projector is displayed by clicking this item.
3 [Projector control]
The [Projector control] page is displayed by clicking this
item.
4 [Detailed set up]
The [Detailed set up] page is displayed by clicking this item.
5 [Change password]
The [Change password] page is displayed by clicking this
item.
6 [Crestron Connected(TM)]
The control page of Crestron Connected™ is displayed by
clicking this item.
[Projector status] page
Click [Status] → [Projector status].
Display the status of the projector for the following items.
14
6
7
9
1
2
3
4
10
11
12
13
15
5
8
1 [PROJECTOR TYPE]
Displays the type of the projector.
2 [PROJECTOR NAME]
Displays the name set in the projector.
3 [MAIN VERSION]
Displays the rmware version of the projector.
4 [POWER]
Displays the status of the power.
5 [PICTURE MODE]
Displays the status of the picture mode.
6 [SERIAL NUMBER]
Displays the serial number of the projector.
7 [NETWORK VERSION]
Displays the version of rmware of the network.
Chapter 4 Settings - [NETWORK] menu
84 - ENGLISH