E-mail setup page (continued)
J
Enter the E-mail address to which the E-mail is to be sent when two E-mail addresses are going to be
used. Do not enter it when the second E-mail address is not going to be used.
Select the conditions for sending E-mail to the second E-mail address.
MAIL CONTENTS: Select [NORMAL] or [SIMPLE].
ERROR: an error is detected by self-diagnosis.
LAMP1 RUNTIME: remaining lamp service time has reached the value set in the eld.
LAMP2 RUNTIME: remaining lamp service time has reached the value set in the eld.
FILTER REMAIN:
INPUT AIR TEMPERATURE: intake air temperature has reached the value set in the eld.
Check these boxes when E-mail is to be sent periodically to the second E-mail address. E-mail will be sent
at the times and on the days checked.
Button to update settings
To Next Page
Loading...
