Panasonic PTDZ8700U - DLP PROJECTOR

PICTURE menu
ENGLISH -
55
Settings
Press ▲▼◄► to select characters 5 )
and press <ENTER> button to input
them.
Press ▲▼◄► to select [OK], and 6.
press <ENTER> button.
The color temperature setting name is changed.
z
GAMMA
This switches the gamma mode.
Press ▲▼ to select [GAMMA].1 )
Press ◄► or <ENTER> button.2 )
The [GAMMA] individual adjustment screen will
z
be displayed.
Press ◄► to switch [GAMMA].3 )
The setting will change as follows each time
z
◄► is pressed.
DEFAULT
*
USER1
2.8 USER2
DICOM SIM.
1.0
2.0 1.8
[DEFAULT] cannot be selected when the :
Û
[PICTRUE MODE] has been set to [DYNAMIC],
[USER] or [DICOM SIM.].
Note
DICOM is an abbreviation for “Digital Imaging and
z
Communication in Medicine”, which is a standard for
medical imaging devices.
This projector is not a medical device. Do not use the
displayed image for diagnosis.
J
Changing the name of [USER1]
or [USER2]
Select [USER1] or [USER2] in step 3).1.
Press <ENTER> button.2.
The [GAMMA] screen will be displayed.
z
Press ▲▼ to select [GAMMA NAME 3.
CHANGE].
Press <ENTER> button.4.
The [GAMMA NAME CHANGE] screen will be
z
displayed.
Press ▲▼◄► to select characters 5 )
and press <ENTER> button to input
them.
Press ▲▼◄► to select [OK], and 6.
press <ENTER> button.
The gamma selection name is changed.
z
SYSTEM DAYLIGHT VIEW
This corrects images so that they appear vivid when
projected under bright lighting.
Press ▲▼ to select [SYSTEM 1 )
DAYLIGHT VIEW].
Press ◄► or <ENTER> button.2 )
The [SYSTEM DAYLIGHT VIEW] individual
z
adjustment screen will be displayed.
Press ◄► to switch [SYSTEM 3 )
DAYLIGHT VIEW].
The setting will change as follows each time
z
◄► is pressed.
OFF (No correction) 1 (Low)
3 (High) 2 (Medium)
(in units of 0.1)
GAMMA NAME CHANGE