Accessing from the Web browser
Activate the Web browser in the personal computer.1 )
Enter the IP address set by the projector into the URL input eld of the Web browser.2 )
Enter your “User name” and “Password”.3 )
The factory default settings are user1 (user privileges) or admin1 (administrator privileges) for the user
z
name and panasonic (lowercase letters) for the password.
Click [OK] to display the Projector status page.4 )
Note
Avoid activating two or more Web browser simultaneously to work out setting or control actions.
z
Change the password rst of all.
z
Administrator privileges enable the use of all functions. User privileges enable the use of only “Projector status”, “Error
z
information”, “Network status”, “Basic control”, and “Change password”.
If the password is incorrectly entered three times in a row, the lock is set for several minutes.
z
To Next Page
Loading...
