Panasonic PV-GS400 - Playing Back Memory Card Files

Playback Mode
47
Playback Digital Effect Functions
During playback, special digital effects can be
added to the recorded pictures. The same effects
as those of Digital Effects 1 and 2, which are used
during recording, are obtained.
1 Press the [1] Button (84).
2 Press the [SELECT] Button (71) on the
Remote Controller to select a desired digital
effect.
≥When the [SELECT] Button is pressed
repeatedly, the digital effect selection
changes.
≥The same setting can be done using
[EFFECT SEL] Sub-Menu on the
[TAPE PLAYBACK MENU].
To suspend Playback Digital Effect
Temporarily
Press the [OFF/ON] Button (73) to suspend or
restart the digital effect. When the digital effect is
paused temporarily, the selected effect’s
indication flashes.
To Cancel the Digital Effect
Press the [SELECT] Button on the Remote
Controller and clear the digital effect indication.
ª Wipe Mode and Mix Mode
1
Press the [1] Button (84).
2 Press the [SELECT] Button (71) on the
Remote Controller and select [WIPE] or
[MIX].
INDEX INDEX
SC
STOP
KL
∫
V
/REW
STILL ADV
W
s
V
PLAY
PAU SE
FF/
W
STILL ADV
61 5
;
ED
P.B. ZOOM
(84)
SELECT
STORE
OFF/ON
P. B. DI G I TA L
ENTER
VAR.
SEARCH
MENU
(71)
(73)
INDEX INDEX
SC
STOP
KL
∫
V
/REW
STILL ADV
W
s
V
PLAY
PAU SE
FF/
W
STILL ADV
61 5
;
ED
P.B. ZOOM
(84)
SELECT
STORE
KL
∫
OFF/ON
P. B. DI G I TA L
ENTER
VAR.
SEARCH
MENU
(71)
(72)
(73)
3 Press the [STORE] Button (72) at the
moment you want to save as a still picture.
≥The [B] or [C] Indication appears, and
the image is saved.
4 Press the [OFF/ON] Button (73) in the scene
in which you want to use the Wipe or Mix
effect.
≥The scene changes as a result of the Wipe or
Mix effect.
≥The Wipe Function and Mix Function can only
be accessed by using the Remote Controller
during playback.
≥If the [OFF/ON] Button
(73) is pressed while
Wipe or Mix is carried out, the effect will stop
temporarily at that point. Pressing the [OFF/ON]
Button
(73) again will bring back the effect.
≥For other notes concerning this item, see
-80-.
Playing Back a Card
It plays back files recorded on a Card.
1 Set the Mode Dial (44) to Picture Playback
Mode.
2 Start Playback.
1: Starting the Slide Show
5: Playing back the next picture
6: Playing back the previous picture
∫: Stop the Slide Show
;: Pause the Slide Show
1 Folder File Number
2 Picture Size (
-72-)
3 File Number
PC
S
D
(44)
100-0001
3
2
1
PV-GS400Eng.book 47 ページ ２００４年６月４日 金曜日 午後３時１７分