EasyManua.ls Logo

Panasonic PV-GS400 - Program AE Mode Details

Panasonic PV-GS400
102 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Others
77
ª Wind Noise Reduction Function
Does not work with the microphone on the
Magic Wire Remote Control with Narration Mic
nor an external microphone.
When it is set to [ON], directivity of microphone
is regulated depending on the strength of wind
to reduce wind noise.
ª Wide/Pro-Cinema Function
You cannot use these modes when recording
on the card.
The Wide/Pro-Cinema Mode cannot be used
simultaneously with the following functions.
Progressive function
Cinema Mode
The Pro-Cinema Mode cannot be used
simultaneously with the following functions.
Digital Effect Function 1
MagicPix Functions
When the Pro-Cinema Mode is set, the
[REC MODE] is set to [FRAME] and the
[BASS ENHANCE] is set to [6dB] automatically.
When you use a TV with an aspect ratio of 4:3,
using the Wide/Pro-Cinema Mode is not
recommended. (The image will be stretched
vertically.)
ª Cinema Function
Using the Cinema Mode does not widen the
recording angle.
If you play back a tape recorded in Cinema
Mode on a wide-screen (16:9) format TV,
playback size is automatically adjusted to fit the
TV screen format. Please refer to the TV’s
operating instructions for details.
When images are displayed on a TV screen, the
Date/Time Indication may be erased in some
cases.
Depending on the TV, the picture quality may be
lower.
Cinema Mode is cancelled when a Title is
displayed.
Cinema Mode and the Title Creation cannot be
used simultaneously.
Using Cinema Mode deactivates [MULTI] and
[P-IN-P] of [EFFECT1].
Depending on the software in use, the imported
Cinema picture may not be displayed correctly.
ª Program AE
If any of the Program AE Modes are selected,
you cannot adjust the shutter speed (
-37-) or iris
(
-38-).
Using the MagicPix Functions cancels any of
the Program AE modes.
Sports Mode
During normal playback, the image
movement may not look smooth.
Because the color and brightness of the
playback image may change, avoid recording
under fluorescent light, mercury light or
sodium light.
If you record a subject illuminated with strong
light or a highly reflective subject, vertical
lines of light may appear.
If the light is insufficient, the [5] Indicator
flashes.
Sports Mode/Portrait Mode
If you record a still picture in Progressive
Photoshot Mode, the brightness and hue of
the recorded still picture may become
unstable.
If this mode is used for indoor recording,
playback images may flicker.
Low Light Mode
Extremely dark scenes may not be able to be
made brighter to a satisfactory degree.
Spotlight Mode
With this mode, recorded images may
become extremely dark.
If the subject is extremely bright, its recorded
image may become whitish.
Surf & Snow Mode
If the subject is extremely bright, its recorded
image may turn out to be whitish.
ª White Balance
In the following cases, you cannot change
White Balance:
When you set [EFFECT2] to [SEPIA] or to
[B/W].
When you set the Zoom to 12k or higher.
During Digital Still Picture Mode.
When you display a Menu.
When you use the MagicPix Mode.
In the following cases, the [1] Indicator
flashes:
The flashing indicates that the previously
adjusted White Balance setting is still active.
This setting will be kept until White Balance is
adjusted again.
You may not be able to achieve correct White
Balance Adjustment manually under weak
illumination.
ª Manual Shutter Speed Adjustment
You may see vertical lines of light in the
playback image of a brightly shining subject or
highly reflective subject.
During normal playback, movement in the
images may not look smooth.
Because the color and brightness of the
playback image may become unstable, avoid
recording under fluorescent light, mercury light
or sodium light.
PV-GS400Eng.book 77 ージ 2004年6月4日 金曜日 午後3時17分

Table of Contents

Other manuals for Panasonic PV-GS400

Related product manuals