Panasonic PV-GS400 - Playing Back Content on a TV

Playback Mode
52
Playing Back on Your TV
By connecting your Camcorder to your TV, the
recorded scenes can be viewed on your TV
screen.
≥Before connecting them, turn off the power of
both the Camcorder and TV.
1 Connect the [AV IN/OUT] Jack of the
Camcorder and the Video and Audio Input
Jacks of the TV.
≥Connect to the TV with the AV Cable 1. If the
TV has an S-Video Jack, connect the S-Video
Cable 2, too.
≥Plug the AV Cable as shown 3 so that the
cord hangs down.
≥When plugging the pin plug of the AV Cable
into the [AV IN/OUT] Jack, plug it in as far as
it goes.
To Make the Indications Appear on the TV
Screen
Press the [OSD] Button (63) on the Remote
Controller.
≥For other notes concerning this item, see
-81-.
1
2
[VIDEO IN]
[AUDIO IN]
[S-VIDEO IN]
AV IN/OUT
PHONES
S-VIDEO
IN/OUT
DV
3
ZOOM
OSD
DISPLAY
DATE/
TIME
RESET
TITLE
PHOTO
SHOT
START/
STOP
(63)
PV-GS400Eng.book 52 ページ ２００４年６月４日 金曜日 午後３時１７分