Panasonic PV-GS400 - Writing Printing Data on a Card; Protecting the Files on a Card

Playback Mode
50
4 Press the [;/∫/6/5] Button to select a
desired title.
≥The selected title is marked with a frame.
5 Press the [ENTER] Button (19) or press the
[MULTI] Button
(12).
≥The selected title is displayed.
≥Recording and Photoshot Recording can be
made with pictures that have titles.
≥A title can be displayed also by pushing [TITLE]
Button
(78) on the Remote Controller.
To Clear the Title Display
Set [DIGITAL] >> [TITLE IN] >> [OFF].
Or press [TITLE] Button on the Remote
Controller.
≥For other notes concerning this item, see
-80-.
Writing Printing Data on a Card
(DPOF Setting)
DPOF Setting Printing data (DPOF Settings),
such as the number of images to be printed, can
be written to the Card. “DPOF” means Digital
Print Order Format.
1 Set the Mode Dial (44) to Picture Playback
Mode.
2 Set [PICTURE PLAYBACK MENU] >>
[EDITING] >> [DPOF SET] >> [YES] >>
[VARIABLE].
≥When all images are not printed, select
[ALL 0].
STILL
FADE
ENTER
PC
S
D
(44)
MENU
STILL
FADE
ENTER
DPOF SETTING
!:ENTER MENU:EXIT
2
1
(16)
3 Select a desired picture and press the
[ENTER] Button
(19).
≥The selected picture is marked with a frame.
≥The number of prints set by DPOF 1 is
displayed.
4 Press the [5] Button (18) or [6] Button
(21) to select the number of pictures to be
printed, and press the [ENTER] Button
(19).
≥[¥] Indication 2 is displayed in the picture
set. (
-72-)
≥This is not the setting of the number of prints
for printing on PictBridge. (
-56-)
5 Repeat Steps 3 and 4 and press the [MENU]
Button
(16) when the setup is completed.
To Verify DPOF Setting
Select [VERIFY] in Step 2. The pictures for which
1 or more print is set in DPOF are played back
continuously.
≥For other notes concerning this item, see
-80-.
Protecting the Files on a Card
(Lock Setting)
Precious files recorded on a Card can be locked
to prevent accidental erasure. (Even if files are
locked, the files will be deleted if the Card is
formatted.)
1 Set [PICTURE PLAYBACK MENU] >>
[EDITING] >> [FILE LOCK] >> [YES].
2 Select the file to be locked, and press the
[ENTER] Button
(19).
≥The selected file is locked and the [ ]
Indication 1 appears. Repeat this procedure
to lock 2 or more files.
≥Press the [ENTER] Button
(19) again to
cancel.
≥The SD Memory Card has a write protection
switch. (
-80-)
≥For other notes concerning this item, see
-80-.
MENU
STILL
FADE
ENTER
(16)
FILE LOCK
!:ENTER MENU:EXIT
640 640
640
640 640
640
1
PV-GS400Eng.book 50 ページ ２００４年６月４日 金曜日 午後３時１７分