1-10-8
11
■
Wiring procedure
Follow the wiring procedure below for terminal connection.
(1) Set the wiring and cables for the power and signal lines to the outdoor unit together, and secure each wire and cable with the tie.
(2) Set up the wiring and cable for the outdoor unit piping and secure with a tie.
1 Secure and clamp the wiring and cable together with power and signal lines using the tie.
2 Secure and clamp all wiring and cable together with the indoor/outdoor piping using the tie
(field supply).
01_301769_2WAY_eng.indb 23 2018/3/20 9:15:03
SM830266-00_大洋州向けR32シングルTD&SM.indb 8 18/03/29 10:19:56
To Next Page
Loading...
