Panasonic SA-PT160E - Disassembly of SMPS Module; SMPS Module P.C.B

Note : Refer to the diagrams of Main P.C.B. (Item 20.2) for the
location of the part.
9.16. Disassembly of SMPS Module
P.C.B.
•
• •
• Follow (Step 1) to (Step 3) of Item 9.3.
Caution Note: The SMPS Module P.C.B. is advisable to be
replaced as a unit. Do not attempt to replace any individual
components on board.
Step 1 Remove 4 screws from SMPS Module P.C.B.
Step 2 Detach FFC cable from the connectors (CN2 & CN3) on
SMPS Module P.C.B.
Step 3 Remove 1 screw from the rear panel.
Step 4 Release tab of the rear panel in the direction of arrow.
Step 5 Remove SMPS Module P.C.B.
9.17. Disassembly of Tuner Extent
P.C.B.
•
• •
• Follow (Step 1) to (Step 3) of Item 9.3.
Step 1 Remove 1 screw at the rear panel.
Step 2 Release the tab of the rear panel in the direction of
arrow.
Step 3 Remove the Tuner Extent P.C.B. in the direction of
arrow.
44
SA-PT160E / SA-PT160EB / SA-PT160EG