Panasonic SB-WA310 - ADSC Internal RAM Display; Lock Function

Processing
Type
Processing Item Details
Processing
number
Initialization Initialization Operated after tray is loaded. (Transit to READY or PREPARE
mode.)
0
~
Secondary
learning
Performs servo learning for L1 layer of DVD-DL and 1 single
speed of CD-DA.
50 ~
7F
Re-
initialization
Re-initialization Each servo is turned on at READY mode by user. 80
Seek Seek Optical pickup is moved to a designated position on the disc. A0
~
Recovery Recovery
(Error check) Search during PLAY/SEEK mode
C0
(Action) Error recovery according to attention error interruption sent
from S-ODC.
C5
(Q-code read) Reset and retry when Q-code cannot be read.
CA
Stop Stop Disc operation completely stops as servo down according to
user's operation.
F0
10.7. ADSC internal RAM display
Displays servo learning values of ADSC internal RAM as servo processor.Used for judging the
quality of servo operation, disc, and OPU.Followings are commonly displayed addresses:
10.8. Lock Function
This function prohibits removal of disc and some disc operations to prevent loss of disc at a
shop during sales promotion or equivalent occasions. While this function is activated, the player
displays "LOCKED" if any button is touched.
10.8.1. Setting
While pressing and holding down the "STOP" key on the unit, press the POWER button on the
remote controller unit to activate. (The message, "LOCKED" appears when the function is
activated.)
10.8.2. Exiting Lock Function
32