Panasonic SB-WA310 - Page 50

Procedures and Operational Check
“ATTENTION SERVICER”
Some chassis components may have sharp edges.
Be careful when disassembling and servicing.
1. This section describes procedures for checking the operation of
the major printed circuit boards and replacing the main
components.
2. For assembly after operation checks or replacement, reverse the
respective procedures.
Special reassembly procedures are described only when required.
3. Select items from the following index when checks or replacement
are required.
- P.C.B. Positions
- Removal of Top Cabinet
- Removal of Front Panel
- Removal of VTR Mecha Unit
- Removal of DVD Mecha Unit
- Removal of DVD Module (2) P.C.B.
- Removal of Tuner, DSP, Regulator, Input, Power and Main P.C.B.
- Removal of Traverse Deck Unit and Optical Pickup
- Removing of the Cassette Tape Manually.
- Removing of the DVD Disc Manually
Warning:
This product uses a laser diode. Refer to caution statement
Precaution of Laser Diode.
16.1. P.C.B. Positions
50