31
13 Schematic Diagram Notes
(All schematic diagrams may be modified at any time with
the development of new technology)
Notes:
• “ * ” REF IS FOR INDICATION ONLY.
• Importance safety notice :
Components identified by ( ) mark have special character-
istics important for safety.
Furthermore, special parts which have purposes of fire-retar-
dant (resistors), high-quality sound (capacitors), low-noise
(resistors), etc. are used.
When replacing any of components, be sure to use only
manufacturer's specified parts shown in the parts list.
• Capacitor values are in microfarad(μF) unless specified
otherwise, F=Farad, pF=Pico-Farad
Resistance values are in ohm(Ω), unless specified other-
wise, 1K=1,000Ω, 1M=1,000KΩ
• Voltage and Signal lines:
S1000:
POWER switch ( ).
: +B signal line
: Audio Output signal line
To Next Page
Loading...
