8
4 Specifications
Q GENERAL
Power consumption: Active subwoofer : 20 W
Power consumption in off mode: Active subwoofer : Approx. 0.2 W
Power supply: AC 120 V, 60 Hz
Dimensions (W x H x D):
Active subwoofer : 250 mm x 323 mm x 356 mm (9 27/32” x 12 23/32” x 14 1/32”)
Mass:
Active subwoofer : Approx. 6.7 kg (14.8 lbs)
Operating temperature range: 0°C to +40°C (+32°F to +104°F)
Operating humidity range: 20% to 80% RH (no condensation)
Q AMPLIFIER SECTION
RMS Output Power
Subwoofer ch: 120 W per channel (8 Ω), 100 Hz, 10% THD
Total RMS Dolby Digital mode power: 240 W
FTC Output Power
Subwoofer ch: 37 W per channel (8 Ω), 40 Hz to 120 Hz, 1% THD
Total FTC Dolby Digital mode power: 87 W
Q SPEAKER SECTION
ACTIVE SUBWOOFER
Type: 1 way 1 speaker system (Kelton type)
Woofer: 16 cm (6 1/2”) Cone type
Passive radiator: 25 cm (10”)
Output sound pressure: 78 dB/W(1m)
Frequency range: 35 Hz to 180 Hz (-16dB)
40 Hz to 160 Hz (-10dB)
Note:
1. Specifications are subject to change without notice.
2. Total harmonic distortion is measured by the digital spectrum analyzer.
To Next Page
Loading...
