Panasonic SC-HTB490 - User Manual

Other manuals for Panasonic SC-HTB490

Basic Operating Instructions2 pages

Instruction Manual16 pages

Questions and Answers:

E
Erika AlexanderSep 8, 2025
What to do if no audio and power switches off automatically on Panasonic SC-HTB490?
- J
  jason32Sep 8, 2025
  If there is no audio and the power of the main unit switches off automatically on your Panasonic Home Theater System, there may be a problem with the amplifier. Disconnect the AC mains lead and consult the dealer. If the volume is extremely high, lower it. If the system is in an extremely hot place, move it to a cooler place, wait a few moments, and then try to switch it on again. If the problem persists, confirm the indicators' status, switch off the system, disconnect the AC mains lead, and consult your dealer, remembering the indicators' status to inform them.
K
Kathleen MurphySep 10, 2025
How to fix no sound from the subwoofer on Panasonic Home Theater System?
- K
  Kathy ShieldsSep 10, 2025
  If there is no sound from the subwoofer of your Panasonic Home Theater System, check that the active subwoofer is switched on. Also, verify that the WIRELESS LINK indicator is switched on.
M
Mr. James SalinasSep 12, 2025
Why does sound lag behind image on Panasonic SC-HTB490?
- C
  Cody WebbSep 12, 2025
  If the sound lags behind the image on your Panasonic Home Theater System, and the system is connected to the TV via Bluetooth[®], the sound output from this system may lag behind the TV image. Connect this system and the TV with an HDMI cable or an optical digital audio cable.
J
Jennifer JohnsonSep 13, 2025
Why audio format shown on display does not correspond to the playback source on Panasonic Home Theater System?
- D
  Donald ChambersSep 14, 2025
  If the audio format shown on the display of your Panasonic Home Theater System does not correspond to the playback source, and the playback source is Dolby Digital or DTS[®], set the audio output setting of the connected equipment (e.g., TV, player) to bitstream.
R
rhodesrebeccaSep 16, 2025
What to do if USB device is drawing too much power on Panasonic SC-HTB490?
- J
  John HurstSep 16, 2025
  If the USB device is drawing too much power on your Panasonic Home Theater System, disconnect the USB device, switch off the system, and then switch it on again. Also, check the connection, as it may be caused by a faulty USB cable.
J
Jason HuertaSep 18, 2025
Why dual audio cannot be changed from main to secondary on Panasonic SC-HTB490 Home Theater System?
- H
  Hailey ThompsonSep 18, 2025
  If the audio received from the connected device is not 'Dual Mono' or the output setting is not 'Bitstream', the setting cannot be changed from this system. Change the setting on the connected device.

Panasonic SC-HTB490 Specifications

General

RMS rated power	320 W
Audio output channels	2.1 channels
Surround modes quantity	2
Wi-Fi	No
Bluetooth	Yes
Bluetooth version	4.2
Connectivity technology	Wireless
Soundbar speaker RMS power	160 W
Power consumption (standby)	0.5 W
Product color	Black
Cables included	AC
Number of products included	7 pc(s)
Harmonized System (HS) code	85182200