9
Operating Instructions
∫ If the TV’s remote control sensor is
blocked by this unit.
Try using the TV’s remote control from a different
angle. If the problem persists, you can use the
supplied IR Blaster to relay the signal to the TV.
(> 21)
≥ Do not use the IR Blaster if the TV’s remote
control sensor is not blocked by this unit.
∫ If irregular colouring occurs on your
TV, turn the TV off for about
30 minutes.
If it persists, move this unit further away from the
TV.
Place to the right or left of the TV, on the floor or
on a sturdy shelf so that it will not cause
vibration. Leave about 30 cm from the TV.
≥ Place the active subwoofer within approximately 10 m of this
unit, and in a horizontal position with the top panel faced
upward.
≥ To allow for proper ventilation and to maintain good airflow
around the active subwoofer, position it with at least 5 cm of
space on all sides.
≥ Do not use the active subwoofer or this unit in a metal
cabinet or bookshelf.
The Active subwoofer
To avoid interference, maintain the following
distances between the active subwoofer and
other electronic devices that use the same
radio frequency (2.4 GHz band).
A Active subwoofer
B Wireless LAN: approx. 2 m
C Cordless phone and other electronic devices:
approx. 2 m
The active subwoofer will automatically seek a
clear channel if any of these other devices
interfere with its communication.
When this happens there is a brief interruption to
the audio coming from the subwoofer.
This is the normal operation of the product
working to assure the best possible performance
of your home theater audio system.
If the interference persists, try moving the other
devices to another location outside the range of
the active subwoofer or move the active
subwoofer nearer to this unit.
SCHTB500EGGNGS_RQTX1185-B.book Page 9 Wednesday, July 7, 2010 5:18 PM
To Next Page
Loading...
Need help?
General
Weight and Dimensions
