Panasonic SC-HTB8 - Selecting Placement Method

Getting started
VQT5J42
11
Precautions
Choose a placement method that suits you best.
∫ When placing the main unit in front of the TV
The main unit may block or interfere with the TV’s various sensors (C.A.T.S. (Contrast Automatic
Tracking System) sensor, remote control sensor, etc.) and the 3D Eyewear transmitters on a 3D
compatible TV.
≥If interference occurs, move the main unit further away from the TV. If the TV still does not function
correctly, try using it in a rack or in the wall mount position.
∫ If the TV’s remote control sensor is blocked by the main unit
Try using the TV’s remote control from a different angle.

≥ Do not use the main unit in a metal cabinet.
≥ If irregular colouring occurs on your TV, turn the TV off for about 30 minutes. If it persists, move the main unit further
away from the TV.
≥ Keep magnetised items away. Magnetised cards, watches, etc., can be damaged if placed too close to the main unit.
≥ Keep the main unit approximately 150 mm away from the TV.
Selecting the placement method
When placing the main unit
on a rack or on a table
≥ Place the main unit on a flat
and horizontal surface.
≥ Place the main unit in front of
the TV pedestal.
When attaching the main
unit to a wall
≥ Place the main unit on a
flat and vertical surface.
Page 12
Page 13
SC-HTB8EG_EB_GN_VQT5J42.book 11 ページ ２０１４年３月７日 金曜日 午後８時３２分