Panasonic SC-HTB8 Operating Instructions

18
VQT5J42
There is no audio.
The power of the main unit turns off
automatically.
(When the main unit detects a problem, a safety measure
is activated and the main unit automatically switches to
standby mode.)
≥ There is a problem with the amplifier.
≥ Is the volume extremely high?
If so, lower the volume.
≥ Is this system placed in an extremely hot place?
If so, move this system to a cooler place and wait a few
moments and then try to turn it on again.
If the problem persists, check if the TV indicator and the
BD/DVD indicator are blinking first. After checking the
indicators, turn off this system, unplug the AC mains lead,
and consult your dealer. Make sure to remember which
indicators were blinking and inform the dealer of them.
Unit care
∫ Clean this system with a soft, dry cloth
≥ When dirt is heavy, wring a cloth moistened in water
tightly to wipe the dirt, and then wipe it with a dry cloth.
≥ Never use alcohol, paint thinner or benzine to clean this
system.
≥ Before using chemically-treated cloth, carefully read the
instructions that came with the cloth.
∫ To dispose or transfer this system
This system may keep the user settings information in the
main unit. If you discard the main unit either by disposal or
transfer, then follow the procedure to return all the settings
to the factory presets to delete the user settings.
(> 17, “To return to the factory defaults.”)
≥ The operation history may be recorded in the memory
of the main unit.
License
Indicator illumination
The indicators display the condition of this system by flashing. The indicator patterns illustrated below
are displayed during normal operational conditions. They do not refer to the indications of a problem.
The Bluetooth
®
word mark and logos are owned by the
Bluetooth SIG, Inc. and any use of such marks by
Panasonic Corporation is under license. Other trademarks
and trade names are those of their respective owners.
Indicator Description
The indicator blinks for 20 sec.
≥ When the setting is on
( “Auto Power Down” and “Bluetooth
®
Stand-by”) (> 16)
The indicator blinks for 20 sec.
≥ When the setting is off
( “Auto Power Down” and “Bluetooth
®
Stand-by”) (> 16)
The indicators blink for 10 sec.
≥ When the remote control code is changed (> 16)
The indicators blink once.
≥ When changing the setting
( “To turn off the volume limitation”) (> 16)
The indicators blink twice.
≥ When the main unit is reset (> 17)
Bluetooth
®
indicator blinks quickly.
≥ When the main unit is ready for pairing (> 9)
Bluetooth
®
indicator blinks slowly.
≥ When the main unit is waiting to connect (> 9)
Bluetooth
®
indicator turns on.
≥ When the main unit is connected with a Bluetooth
®
device
(> 9)
ヵヷ ャュバュヷュ ヤロユモンチヷヰリヤユ ヴヶンンヰヶワュ
ヵヷ ャュバュヷュ ヤロユモンチヷヰリヤユ ヴヶンンヰヶワュ
ヵヷ ャュバュヷュ ヤロユモンチヷヰリヤユ ヴヶンンヰヶワュ
ヵヷ ャュバュヷュ ヤロユモンチヷヰリヤユ ヴヶンンヰヶワュ
SC-HTB8EG_EB_GN_VQT5J42.book 18 ページ ２０１４年３月７日 金曜日 午後８時３２分

Panasonic SC-HTB8 Specifications

General

Audio decoders	DTS Digital Surround, Dolby Digital, Dolby Pro Logic II
RMS rated power	80 W
Audio output channels	2.0 channels
Audio Return Channel (ARC)	Yes
Subwoofer included	No
Product color	Black
TV stand usage	-
Quantity	1
Apple docking compatibility	Not supported
AC input voltage	120 V
AC input frequency	60 Hz
Power consumption (standby)	0.5 W
Power consumption (typical)	16 W
HDMI ports quantity	0
Connectivity technology	Wired & Wireless
Maximum screen size	32 \

Weight and Dimensions

Depth	118 mm
Width	750 mm
Height	65.5 mm
Soundbar weight	2300 g