VQT5J42
19
Specifications
≥ Specifications are subject to change without notice.
≥ Mass and dimensions are approximate.
≥ Total harmonic distortion is measured by a digital spectrum
analyzer.
AMPLIFIER SECTION
RMS output power : Stereo mode
Front ch (non-simultaneous drive)
40 W per channel (1 kHz, 10 % THD, 8 ≠)
Total RMS Stereo mode power
80 W
SPEAKER SECTION
FRONT SPEAKER (L/R)
Type
1 way, 1 speaker system (passive radiator type)
Unit(s)
8cm k2 (Cone type)
Impedance
8 ≠
Passive Radiator
Unit(s)
8cm k2
Bluetooth
®
SECTION
Bluetooth
®
system specification
Bluetooth
®
Version 3.0
Wireless equipment classification
Class 2 (2.5 mW)
Supported profiles
A2DP (with SCMS-T)
Supported codec
SBC
Frequency band
2.4 GHz band FH-SS
Operating distance
approx. 10 m Line of sight
TERMINALS SECTION
Digital Audio Input (TV)
Optical digital input
Optical terminal
Sampling Frequency
32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
Audio Format
LPCM
Analog Audio Input (BD/DVD)
Audio input
Pin jack
GENERAL
Power consumption
20 W
Power consumption in standby mode
Approx. 0.5 W
Power supply AC 220 V to 240 V, 50 Hz
For table top layout
Dimensions (WkHkD)
750 k65.5 k118 mm
For wall mounting layout
Dimensions (WkHkD)
750 k115 k65 mm
Mass
Approx. 2.3 kg
Operating temperature range
0
o
C to r40
o
C
Operating humidity range
20 % to 80 % RH (no condensation)
SC-HTB8EG_EB_GN_VQT5J42.book 19 ページ 2014年3月7日 金曜日 午後8時32分