Panasonic SC-HTB8 Operating Instructions

Getting started
VQT5J42
13
Precautions
Make sure that the screw used and the wall are strong enough to support the weight of at least 33 kg.
The screws and other items are not supplied as the type and size will vary with each installation.
≥Refer to step 3 for details about the required screws.
≥Be sure to attach the fall prevention cord as a secondary safety measure.
Additionally required accessories (commercially available)
≥Screws for wall mounting ............................................................................................................. k 2
≥Fall prevention cord...................................................................................................................... k 1
≥Screw eye (to attach the fall prevention cord) .............................................................................. k 1

≥ Use a cord that is capable of supporting over 10 kg (with a diameter of about 2 mm).
Slide the MULTI ANGLE switch to “WALL MOUNT”.
Attach the cord to the main unit.
A Cord
§
§ If the cord cannot be threaded through the holes, try bending the cord in 2 locations,
about 5 mm apart from the tip, at an angle of 45
o
(as illustrated above).
When attaching the main unit to a wall

SC-HTB8EG_EB_GN_VQT5J42.book 13 ページ ２０１４年３月７日 金曜日 午後８時３２分

Panasonic SC-HTB8 Specifications

General

Audio decoders	DTS Digital Surround, Dolby Digital, Dolby Pro Logic II
RMS rated power	80 W
Audio output channels	2.0 channels
Audio Return Channel (ARC)	Yes
Subwoofer included	No
Product color	Black
TV stand usage	-
Quantity	1
Apple docking compatibility	Not supported
AC input voltage	120 V
AC input frequency	60 Hz
Power consumption (standby)	0.5 W
Power consumption (typical)	16 W
HDMI ports quantity	0
Connectivity technology	Wired & Wireless
Maximum screen size	32 \

Weight and Dimensions

Depth	118 mm
Width	750 mm
Height	65.5 mm
Soundbar weight	2300 g