Panasonic SC-PM03 User Manual

CD
operations
Listening to CDs
14
nQT5462 '
WA
%
P ROGRAM
%
(±)(f)<±)
d)dDd)c5
Specified track number
_
Cf
1 ^
I
Program order
%
Cf
i t i
J
can
iiiiilii
iiana
Indicates program mode
Progrgm play
This function allows you to program up to 24 tracks.
n Press ■ to select the CD mode.
pj [In the stop mode]
Press PROGRAM.
Press the numeric button(s) to select the track
you want to play in the desired sequence.
Repeat step Q until you have programmed all
the tracks you want.
Press ► .
Play will start in the programmed sequence.
Play will stop automatically when all the programmed tracks
have been played.
To cancel program play mode
• Press PROGRAM in the stop mode.
Programmed contents will be saved in memory.
•Press ■ in the stop mode.
This will also erase the entire program.
To select a two-digit track
Press >10 and then the two numbers you want.
For example
Track no. 20: >10-^2->0
Track no. 35: >10^3^5
When ^‘FULL” appears □
The number of programmed tracks is limited to 24. No further tracks
can be programmed.
When “-:-appears
The total playing time of the programmed tracks has exceeded
99 minutes 59 seconds. You can still program and play the disc.
Check program contents
Check to see if “P” is displayed, then press either or . B
Everytime you press one of the buttons, the track and program No.
are shown on the display.
Add to the program
In stop mode, repeat step Q.
Cancel entries
From the last
programmed track
Press CANCEL.
A specific track only
Check to see if "P” is displayed, then
select the track with or , and
press CANCEL within 3 seconds.
All tracks
Press ■ -
Memory retention
Your program is retained in memory for about 2 weeks while the sys¬
tem is unplugged.
To replay your program
If you turned OFF your program with PROGRAM, you can play it
again as explained below.
1. Press PROGRAM.
2. Press ► .

Panasonic SC-PM03 Specifications

General

Brand	Panasonic
Model	SC-PM03
Category	Stereo System
Language	English