Panasonic SC-PM03 User Manual

Other
functions
Timer
operations
Using the timer
m
SLEEP
oOoo
oooo
oooo
oooo
oooo
oooo
oooo
oooo
Check "SLEEP” is displayed
(V«eR;
I F' I i n I- -i
15 W 0'b 0
Using the sleep timer
This timer turns your system OFF at the set time (Max. 2 hours, setta¬
ble at 30 minute Intervals). It lets you fall asleep listening to music.
by remote control only
Switch on the power.
While en)oying the desired source:
Press SLEEP to select the desired time. □
Every time you press the button;
30—60-^90-^120-^OFF-,
C
The figure shows how to set the system to standby mode after
30 minutes.
The system is turned off after the set time has elapsed.
To cancel the sleep timer
Press SLEEP to select “OFF”.
To confirm the remaining time
Press SLEEP.
To change the time remaining during operation
Press SLEEP to show the remaining time, and then press SLEEP to
select the desired time.
Note
The sleep timer can be used in combination with the play timer.
The sleep timer always has priority. Be sure not to overlap timer set¬
tings.
Using the timer fader function
(TIMER FADER)
• Using timer fader and sleep timer in combination
Effective In sleep mode with TIMER FADER on. Volume will
decrease slowly till the system is turned off at the end of sleep.
Select this function to provide a more comfortable sleep when listen¬
ing to CD or radio In sleep mode.
• Using timer fader and play timer ON in combination
Effective with timer set and with TIMER FADER on. Volume will in¬
crease from 0 to last set volume level gradually.
Select this function to provide a more comfortable wake up when us¬
ing the play timer as an alarm.
Press TIMER FADER to show ^TADER”. EJ
To cancel the timer fader function
Press TIMER FADER again to cancel.
“FADER" goes out.
Note
•Both timer functions are affected while "FADER” is displayed.
•Timer fader mode works everyday as long as "FADER" is
displayed.
nQT5462 '

Panasonic SC-PM03 Specifications

General

Brand	Panasonic
Model	SC-PM03
Category	Stereo System
Language	English