EN7
English
Control Panel
Menu
Press this pad to choose menu. Menu number will
display and each time this pad is pressed, menu
number will change to the next choice.
(Hold the pad to advance more quickly)
See P. EN10 and 11 for menu number.
Q
Operation status
: displayed for the current stage of the program. Ingredients are being regulated on
the ‘Rest’ stage before kneading.
: displayed when there has been an interruption in the power supply.
: displayed when adding ingredients manually on menu 4, 13, 21 and 29.
Q
Time remaining until program finished
Also when adding ingredients manually, display
will show the time until adding extra ingredients in
the program.
Size
Press this pad to choose
size. See P. EN10 for
available menu.
XL
L
M
Crust
Press this pad to
choose crust colour.
See P. EN10 for
available menu.
Dark
Medium
Light
Start
The start light will
flash during program
selection. Press the start
pad when programming
is completed.
When the start pad is
pressed, the start light
will stop flashing and
become constant.
Stop
If you wish to change the
program, you must stop the
operation by holding down the
stop pad for more than 1 second.
The start light will go off. Then
re–program accordingly.
Timer
Set delay timer (time until bread is
ready) or set the baking/cooking
time for menu 18, 32 and 33.
‘’ Press this pad to increase the
time.
‘’ Press this pad to decrease
the time.
This picture shows all words and symbols, but during operation only those relevant will be displayed.
To Next Page
Loading...
