Recording
• Manual shutter speed
adjustment
• Avoid recording under fluorescent
light, mercury light or sodium light
because the color and brightness
of
the playback image may change.
• If you increase the shutter speed
manually, the gain value will increase
automatically depending on how much
the sensitivity lowers and the noise
on
the screen may increase.
•
You
may see vertical lines
of
light
in
the playback image
of
a brightly
shining subject or highly reflective
subject, but this
is
not a malfunction.
• During normal playback, image
movement may not look smooth.
• When recording
in
an extremely bright
place, the screen may change color or
flicker. If so adjust the shutter speed
manually to [1/60] or [1/100].
• Manual iris/gain
adjustment
•
Ifthe
gain value
is
increased, the noise
on the screen increases.
• Depending
on
the zoom magnification,
there are iris values that are not
displayed.
63
VQT1D97
To Next Page
Loading...
