Panasonic SDR-S10P - Menus Related to [SETUP]

Others
Menus related to
[SETUP]
• [DISPLAY]
• [OFF] • [ON]
The screen indications are selected as
shown
in the illustration below.
• [POWER SAVE]
• [OFF] •
[5 MINUTES]
[OFF]:
The power saving function is not
activated.
[5 MINUTES]:
When about 5 minutes have passed
without any operation, this unit
automatically turns off to prevent the
battery from running down. When you
use this unit, turn it
on again.
•
In the following cases, the unit may not
turn off even when you set this to
[5 MINUTES].
- When using the AC adaptor
- When connecting the unit to a
computer or printer via the USB
cable
[OFF]
[ON]
II
DEC.15.2007
~ II OhOOmOOs ~
R 1 h30m l>1tJ 11111
DEC.15.2007
• [BEEP SOUND]
• [OFF] • [ON]
This allows operations such as starting
and ending recording to be signaled by a
beep.
When [OFF] is set, no beep is heard
when an operation such as recording
is
started or ended.
1 Beep
When you start recording
When you turn on the power
When this unit is recognized by the
computer or the printer, etc.
2 Beeps
When you pause recording
When you turn off the power
2 Beeps 4 times
When an error occurs e.g. recording not
starting. Check the sentence displayed
on the screen.
(-+ 101)
• [INITIAL SET]
• [YES] • [NO]
When there is a menu that cannot be
selected due to another function or mode
being activated, set to [YES] for
changing the menu settings back to the
initial shipping condition.
(The language setting cannot be
changed back to the initial shipping
condition.)
97
VQT1D97