Playback
2 Press the cursor button up or down to select the date for playback,
then press the cursor button
in
the center.
The scenes recorded on the same day are displayed as thumbnails.
MENU
3 Select the scene to be played back.
• The playback setting returns to [VIEW ALL] if the unit
is
turned off or the mode dial
is
operated.
• Even if scenes are recorded
on
the same day, they are grouped separately when the
number of scenes exceeds 99.
Resuming
the
previous
playback
If playback
of
a scene
is
stopped halfway, the playback can be resumed from where it
was stopped.
Press the MENU button, then select
[PLAY SETUP]
~
[RESUME PLAY]
~
[ON] and then press the cursor button
in
the center.
If playback of a motion picture
is
stopped, [R]
appears on the thumbnail view
of
the stopped
scene.
• The resume position memorized is cleared if you operate the mode dial, etc.
(The [RESUME PLAY] setting is kept.)
• [RESUME PLAY]
is
set to [OFF] if an SD card with the write protection switch at the
LOCK position
is
inserted.
(~
22)
67
VQT1D97
To Next Page
Loading...
