8
TH-152UX1 / TH-152UX1W / TH-152UX1C
GPF13UX chassis series have special function and operation setting facility called Option Menu. This Option Menu is use-
ful for special function required customers. This should be set at the installation stage.
Note:
When both main unit buttons and remote control are disabled due to the [Button lock], [Remocon User level] adjustments, set
all the values [Off] so that all the buttons are enabled again.
Press the [Down] button on main unit together with [Return] button on the remote control and hold for more than 5 seconds. The
[Shipping] menu is displayed and the lock is released when it disappears.
Option Menu for GPF13UX series
Option menus default setting Contents
Onscreen display On Enable/Disable to display input mode indication after power on and no signal
indication.
Initial input Off Adjusts the input signal when the unit is turned on.
Input lock Off Locks the input switch operation.
Button lock Off Enable/Disable the operation of the buttons on right side of the main unit.
Remocon User level Off Enable/Disable the operation of the buttons on remote control.
Off-timer function Enable Enable/Disable Off-timer operation.
Aspect Mode Mode1 Select the suitable aspect mode.
Auto Setup Manual Sets the operational mode of the automatic position adjustment in the POS./
SIZE memu.
Studio mode Off Switching functions in setting menus used for television studio applications.
Function button assign 1 3D settings Set the function to operate when the FUNCTION button 1 to 4 on the remote
control is pressed.
Function button assign 2 Scrolling bar
Function button assign 3 Test patterns
Function button assign 4 Blue only
H-Position 0 When the input signal is a 4k2k signal, adjust the horizontal position.
V-Position 0 When the input signal is a 4k2k signal, adjust the vertical position.
3D Safety Precautions On Set show/hide 3D Safety Precautions during power ON.
To Next Page
Loading...
