Panasonic TH-152UX1 - Removal of Power Button Block; Removal of Fan

41
TH-152UX1 / TH-152UX1W / TH-152UX1C
8. Remove 8 screws ( ) and then remove the flexible
cables from the connectors (CA13CM, CA14CM,
CA15CM, CA16CM).
9. Remove 7 screws ( ) and then remove CM(C4)-Board .
9.43. Removal of Power Button
Block
1. Remove Power Button Realy Connectors.
2. Remove 3 screws and then remove Power Button Block.
9.43.1. Removal of S1-Board
1. Remove 2 screws (W) and then remove the Power Button
Bracket.
2. Remove 1 screw (X).
3. Disconnect the connector (S34) and then remove S1-
Board.
4. Remove 2 hooks and then remove the Power Button and
Power Button Spring.
9.43.2. Removal of V2-board
1. Remove 2 screws (Y) and then remove the Power SW
Cover Assy and Power Edge Guard.
2. Disconnect the connector (V22) and then remove V2-
Board.
3. Remove 2 hooks and then remove the 5 Range Button
from V2-Board.
9.44. Removal of Fan
1. Remove Fan Block.
-Remove Fan Block A and V, and removal of Fan Unit
a. Disconnect the Fan Realy Connectors.
b. Remove 4 screws and then remove Fan Block A and
V.
c. Fan Block is turned inside out.
d. Remove each 4 screws and then remove Fan Unit
(92).
-Remove Fan Block B, N, U and P, and removal of Fan
Unit.
a. Disconnect the Fan Realy Connector.