Panasonic TH-37PA20

PC MENU
SYNC
Select SIGNAL from the "PC MENU" menu during PC input signal.
Press to select each item.
lriPc ENu
PICTURE _)
PICTUREPOS,/SIZE
SIGNAL
_, Press _) (ACTION) button
Note:
Sync cannot be adjusted while a DVI signal is being applied.
Setting RGB sync signal
Confirm that the input is set to RGB INPUT (this setting is valid only for RGB INPUT
signal).
H &V:
ON G:
The H and V sync signals are input from the HDND connector.
Uses a synchronized signal on the Video G signal, which is input
from the G connector.
( SYNC d _ b)
(SYNC d_b)
H-FREQ. (kHz)/V-FREQ. (Hz)
Displays the H (Horizontal)/V (Vertical) frequencies.
This display is valid only for RGB input signal.
Display range:
Horizontal 15-110kHz
Vertical 48 - 120 Hz
H-FREQ._ kHz 1
V-FREQ. _ Hz
56