Panasonic TH-50PH30E - Setup for Input Signals; Component; RGB-In Select; YUV; RGB-In Select

1/2
Signal
Screensaver
Extended life settings
Input label
Off
Off
PC Power management
Off
DVI-D Power management
Disable
No signal power off
No activity power off
Enable
OSD Language English
(
UK
)
Component/RGB-in select
RGB
Power save
Setup
1/2
Signal
Screensaver
Extended life settings
Input label
Off
Off
PC Power management
Off
DVI-D Power management
Disable
No signal power off
No activity power off
Enable
OSD Language English
(
UK
)
YUV/RGB-in select
RGB
Power save
Setup
36
Setup for Input Signals
Component / RGB-in select
Select to match the signals from the source connected to the Component / RGB or PC input terminals.
Y, P
B
, P
R
signals “Component”
RGB signals “RGB”
1
2
Press to display the Setup menu.
Press to select the “Component / RGB-in select”.
Press to select the desired input signal.
Component RGB
Press to exit from adjust mode.
Note:
Make setting of the selected input terminal (COMPONENT/RGB IN or PC IN).
3
YUV / RGB-in select
Select to match the signals from the source connected to the DVI input terminals.
YUV signals “YUV”
RGB signals “RGB”
1
2
Press to display the Setup menu.
Press to select the “YUV / RGB-in select”.
Press to select the desired mode.
YUV RGB
Press to exit from adjust mode.
Note:
Make setting during DVI-D IN terminal input.
3