Panasonic TH-50PH30E - Video Equipment Connection; VIDEO and COMPONENT; RGB in Connection

VIDEO and COMPONENT / RGB IN connection
, Y , P B , P R
OUT
P
R
P B
Y
AUDIO
OUT
R
L
VIDEO
OUT
AUDIO
OUT
R
L
Notes:
• Change the “Component/RGB -in select” setting in the “Setup”
menu to “Component” (when Component signal connection) or
“RGB” (when RGB signal connection). (see page 36)
• Signals input to COMPONENT/RGB IN terminals correspond to
Sync on G or Sync on Y.
RCA-BNC
adapter plug
RCA-BNC
adapter plug
DVD Player
VCR
Computer RGB Camcorder
Note:
Additional equipment, cables and adapter plugs shown are not supplied with this set.
9
Connections
Video equipment connection
AV IN (VIDEO): Composite Video Input Terminal (see below)
COMPONENT/RGB IN: Component/RGB Video Input Terminal
(see below)
AV IN (HDMI): HDMI Input Terminal (see page 10)
DVI-D IN: DVI-D Input Terminal (see page 10)
Connect to video equipment such as VCR or DVD player.
PC IN: PC Input Terminal
Connect to video terminal
of PC or equipment with
Y, P B(CB) and PR(CR)
output (see page 11).
SERIAL: Control the
Plasma Display
by connecting
to PC (see
page 12)
Terminals are on the bottom side of the Plasma Display.