1
2
Plug the AC cord into the display unit.
Plug the AC cord until it clicks.
Note:
Make sure that the AC cord is locked on
both the left and right sides.
Connections
Speaker
terminal (R)
Speaker
terminal (L)
When connecting the speakers, be sure to use only the optional accessory speakers.
Refer to the speaker’s Installation Manual for details on speaker installation.
AC cord connection (see page 13)
Speakers (Optional accessories)
AC cord fi xing
Unplug the AC cord
Unplug the AC cord pressing the
two knobs.
Note:
When disconnecting the AC cord, be
absolutely sure to disconnect the AC
cord plug at the socket outlet fi rst.
Cable fi xing
There are 3 holes to fi x the connection cables. As a clamper is not included with the
product, provide a clamper or band as necessary.
When using the Wall-hanging bracket (vertical)
Note:
When using the Wall-hanging bracket (vertical)(TY-WK42PV20), use the holes
and to
secure the cables. If the cables are fi xed on the hole
, the cables may be caught by the
wall-hanging bracket.
AC cord connection and fi xing, cable fi xing
Red
Black
Red
Black
While pressing the lever,
insert the core wire.
Return the lever.
8
Speaker connection
To Next Page
Loading...
