Panasonic TH-58PF12UK - Removal of SS2-Board; Removal of C1-Board; Removal of C2-Board; Removal of C3-Board

26
TH-58PF12UK
9.17. Removal of SS2-Board
1. Disconnect the connector (SS03).
2. Remove the flexible cable from the connector(SS57).
3. Remove 3 screws and then remove SS2-Board.
9.18. Removal of C1-Board
1. Remove the Slot Block.
(Refer to Removal of Slot Block)
2. Remove 4 screws ( ) and 3 screws ( ) then remove the
Reinforcement Angle(R).
3. Remove 10 screws.
4. Remove the flexible cables from the connectors (C10,
CB1, CB2, CB3, CB4, CB5).
5. Remove 5 screws and then remove the C1-Board.
9.19. Removal of C2-Board
1. Remove the Slot Block.
(Refer to Removal of Slot Block)
2. Remove 3 screws and then remove the AC-Inlet block.
3. Remove 10 screws
4. Remove the flexible cables from the connectors (C20,
C21, C22, C26, CB6, CB7, CB8, CB9, CB10).
5. Remove 5 screws and then remove C2-Board.
9.20. Removal of C3-Board
1. Remove the Fan Block (2).
(Refer to Removal of Fan)
2. Remove 4 screws ( ) and 3 screws ( ) then remove the
Reinforcement Angle(L).