Panasonic TH-58PF12UK - Page 31

31
TH-58PF12UK
21. Disconnect the connector (P34).
22. Remove 2 screws ( ) and then remove the S1-Board
Block.
23. Disconnect the connector (P9).
24. Remove 3 screws ( ) and then remove the AC-Inlet
Block.
25. Disconnect the connectors (P51, P54, P56).
26. Remove 9 screws and then remove P(MULTI)-Board.
27. Remove 6 screws and then remove P(SUS)-Board.
Remove the Barrier.
28. Remove the flexible cables from the connectors (C10,
C20, C26, C36).
29. Remove 10 screws.