Panasonic TH-65PF10WK - Specifications

TH-65PF10WK/TK
9
4 Specifications
Power Source 220 - 240 V AC, 50 / 60 Hz (WK) 110 V AC, 50 / 60 Hz (TK)
Power Consumption
Power on 725 W (WK) 755 W (TK)
Stand-by condition Save OFF 0.7 W, Save ON 0.5 W (WK) Save OFF 0.6 W, Save ON 0.4 W (TK)
Power off condition 0.3 W (WK) 0.1 W (TK)
Plasma Display panel Drive method: AC type 65-inch, 16:9 aspect ratio
Screen size
56.5
” (1,434 mm) (W) × 31.8” (807 mm) (H) × 65” (1,646 mm) (diagonal)
(No. of pixels) 2,073,600 (1,920 (W) × 1,080 (H)) [5,760 × 1,080 dots]
Operating condition
Temperature 0 °C - 40 °C
Humidity 20 % - 80 %
Applicable signals
Scanning format
525 (480) / 60i 60p, 625 (575) / 50i 50p, 750 (720) / 60p 50p, 1125 (1080) /
60i 60p 50i 50p 24p 25p 30p 24sF, 1250 (1080) / 50i
PC signals VGA, SVGA, XGA, SXGA,
UXGA ..... (compressed)
Horizontal scanning frequency 15 - 110 kHz
Vertical scanning frequency 48 - 120 Hz
Connection terminals
HDMI A-B TYPE A Connector × 2
COMPONENT / RGB IN Y/G (BNC) with sync 1.0 Vp-p (75-ohm)
P
B
/B (BNC), P
R
/R (BNC) 0.7 Vp-p (75-ohm)
AUDIO IN (RCA PIN JACK × 2) 0.5 Vrms (high impedance)
PC IN (HIGH-DENSITY MINI D-SUB 15PIN) Y or G with sync 1.0 Vp-p (75-ohm)
Y or G without sync 0.7 Vp-p (75-ohm)
B/P
B
/C
B
: 0.7 Vp-p (75-ohm)
R/P
R
/C
R
: 0.7 Vp-p (75-ohm)
HD/VD: 1.0 - 5.0 Vp-p (high impedance)
AUDIO IN (M3 JACK) 0.5 Vrms
SERIAL EXTERNAL CONTROL TERMINAL (D-SUB 9PIN) RS-232C COMPATIBLE
SPEAKERS 8-ohm, 20 W [10 W + 10 W] (10 % THD)
Accessories Supplied
Remote Control Transmitter EUR7636070R
Batteries AA Size × 2
Fixing bands TMME203 × 2
Dimensions (W × H × D) 1,554 mm × 925 mm × 99 mm (excluding handle portion)
Mass (weight)
main unit only approx. 72.0 kg net
with speakers approx. 78.0 kg
Note:
• Design and specifications are subject to change without notice. Mass and dimensions shown are approximate.
• This equipment complies with standards listed below.
AS/NZS60065, CISPRE22 Class-B