42
TH-85PF12U
15. Remove 4 screws and then remove Rear Cover Connect-
ing Metal (A).
16. Disconnect the Fan Relay Connectors.
17. Remove 16 screws and then remove the Fan Blocks (1,
2, 3, 4).
18. Disconnect the connectors (DN3, DN5, DN9).
19. Remove the flexible cables from the connectors (DN1,
DN2).
20. Remove 5 screws and then remove the DN-Board and
Fixed Plate.
21. Disconnect the connector (H51).
22. Remove 2 screws and then remove H5-Borad Block.
23. Disconnect the connectors (DS4, DS6).
24. Remove 3 screws and then remove the Slot Block.
To Next Page
Loading...
