Panasonic TK7585-SHK - Monitoring the Water Flow

50
While water is running through the Alkaline Ionizer, the water flow (total flow of water coming out of the
main spout, acidic water spout and drain outlet per minute) is displayed and can be monitored. (Flow
display)
ⳇᖛʑŊሳㆴḻᖛᙟ⸇ņᕓ 1 Ӡ⾝᮫ӛᖛםȮ⷇ᖛӛᖛםُ࿢ᖛםᙟӛ᱿׶⤺⸇ŇŊר˫Խ˫󰶉⦓ȯ
ņᙟ⸇ㆴḻŇ
When the water flow cannot be displayed/ ᤀᘍᙟ⸇ㆴḻᆹƥƥ
When the flow cannot be displayed (such as when the water pressure is too low), it can be monitored
on the “Check flow” display.
ᤀᘍᙟ⸇ㆴḻᆹņᖛࣱᾀŇŊרᮢᙟ⸇󰶉⦓ㆴḻ󰶉⦓ᙟ⸇ȯ
Monitoring the water flow/ ⤐ૣᖛᙟ⸇
Turn off the faucet, and press
repeatedly until the buzzer beeps four times
(about 3 seconds).
〦ᖛ㕻ㆊŊ᳅ӷȵܶܶܶܶȶ⊖פ 4 ᓝ
ྈ ņ₎ 3 ấ⾝Ň
 When the button is pressed again for about
3 seconds, the display returns to the previous
screen. The water quality is automatically
returned to the “Alkaline” setting used last.
 Ҫྈ 3 ấ⾝Ŋߊӷ׆᱿ㆴḻȯ໣ᖛ⫨ሳ⎊Ւ
ߊӷʀᓝᮢ᱿ȵ㓇ඖȶȯ
1
Open the faucet.
⿭ᖛ㕻ㆊ
 When the faucet is turned off, the display returns to the previous screen.
 〦ʴᖛ㕻ㆊŊଔሳߊӷ׆᱿ㆴḻȯ
2
 Check flow
display
 ᙟ⸇󰶉⦓ㆴḻ
Press repeatedly until “Flow”
appears on the LCD display.
ྈ Ŋ᳅ӷ᚝ᇘㆴḻӛ󰪁
ȵᙟ⸇ȶ
 Each time the button is pressed, the LCD display changes.
 No figure for the flow will be displayed when the supply of water has
been turned off or when the flow is under about 1.0 liter/minute.
 ᕓྈɺᓝŊ᚝ᇘㆴḻଔሳ⩐ջȯ
 ᔋᖛʑ໣ᙟ⸇ቍⳭ₎ŏ.0 ҝ֗ / Ӡ᱿⥾Ŋʃሳㆴḻᙟ⸇ᄲϊȯ
Example/ 
 Flow display
 ᙟ⸇ㆴḻ
For Your Operating Convenience (continued)/ ᅞ͵ᮢņ࿲↲Ň
ZGS0TK7585HKE0Z.indb 50ZGS0TK7585HKE0Z.indb 50 2009/12/09 9:50:482009/12/09 9:50:48