60
Maintenance/ℋΔΎ
The water volume will be reduced if dirt and other foreign matter
are allowed to clog the filter at the bypass selector mount
coupling. Follow the steps below to clean the filter.
Ӡᖛ〦મ⡶ם᱿⳧ᡇℐߎỬᖸ࠲Ŋᙟ⸇ଔሳ⩐ଅȯ
⦼ᤫʁ⥆ㅯᛤ࿕⳧ᡇℐȯ
Main unit, bypass selector and acidic
water stand/㋤ȮӠᖛ〦Ȯඖᖛಚ
Bypass selector mount coupling (filter and water intake)/ Ӡᖛ〦મ⡶ם
Soak a soft cloth in water, wring it out
well, and use it wipe the units and
parts.
Use a toothbrush or other implement
to remove dirt at the shower part.
˫Ⱆ᱿లᗹᖛŊᮢԻეʯʠരჍȯ
ᚲᢇⵒ㋢࿚ᆹŊ⦼ᮢᧃӽᾀ૽㋢ቺ⣫
ӽぜȯ
Loosen the nut, remove the bypass selector,
and take out the filter.
㌂➦രŊҪབྷʁ〦Ŋ
חʁ⳧ᡇℐ
Set the bypass selector to “Purified”.
⦼૽Ӡᖛ〦ӡဘ߱ȵPurifiedȶ᱿⇦ȯ
1
Wash the filter and
water intake.
ᛤᘺ⳧ᡇℐُ
〦ᘜᖛם
2
Shower part
ᚲᢇⵒ
Filter
⳧ᡇℐ
Water intake
ᘜᖛם
▼
Plated part
⼐⸉ⵒӠ
Nut
➦
Bypass selector
Ӡᖛ〦
Gasket
ࣆᦸ
Filter
⳧ᡇℐ
Gasket washer
Ӡᖛ〦ᮢࣆᦸಚ
Clean using a
toothbrush or
other implement.
Ӵᮢᧃӽᾀᛤះ
ZGS0TK7585HKE0Z.indb 60ZGS0TK7585HKE0Z.indb 60 2009/12/09 9:51:052009/12/09 9:51:05
To Next Page
Loading...
