61
ņ⳧ᡇℐȮᘜᖛםŇ
Install the bypass selector.
મ⡶Ӡᖛ〦
Install the filter without fail.
After installing the bypass selector, run water for about 5 seconds at the
“Unpurified” or “Shower” setting.
⦼Ֆൕમ⡶⳧ᡇℐ
મ⡶രŊ૽〦ӡဘ⎏ȵUnpurifiedȶȵShowerȶ᱿⇦Ŋ⩕ᖛ₎ᙟ 5 ấ⾝ȯ
3
▼
⦼խᮢᛤះԵȮᖸ⁆Ȯẽ⸃ԵȮဧᱹᗴȮⶮ
ᥨᗴᾀᛤᘺȯ
⦡ᮢᆹŊ㈸ʀᮢᖛჍᛍŊ૽⠧ㄇ᱿ᛤះԵჍ࿚ȯņ㋤
ሷᗹӷᛤះԵ᱿ᆹαŊˇר⋱⎐⼐⸉ⵒӠטံԓ
┛Ȯᑋ⋵ԟ⡣Ȯ⩐⏨Ȯ⩐ഐ᱿׆ߌŇ
Ʃ ᮢᖸᛤះԵ᱿⥾ŊӛᖛᾷሳӛᖛʃㅯŊ⎐ᄑ
ゃȯ
⦼խᮢ⸉଼⢌᱿ӽઈᾀȯ
ņⴍ҉ⳍໞံࣺ᱿׆ߌŇ
ᅩⱧ➦ᆹŊ⦼խᮢడңȯ
ņⴍ҉ⳍໞ➦ᶝံ᱿׆ߌŇ
Install the parts
in the correct
sequence
⦼ʃ⣬၄⼂ㅯ
Tighten up the nut securely
૪߸⽁ℤ➦
CAUTION
Avoid bringing the main unit into contact
with water by spraying it with water or
washing.
Otherwise, power leaks, electric shocks and/or
trouble may result.
ᘜา
⦼խᮢᛤᖛោᢇ㋤ᛤᘺ
ⴍ҉ⳍໞភヅȮ⤯ヅȮᄑゃ᱿׆ߌȯ
Do not use detergents, cleansers, paint
thinners, benzine, alcohol or kerosene
for cleaning purposes. If, for instance, a
detergent has been used by mistake, wipe
the surface with a damp cloth to remove all
traces of the detergent.
(Otherwise, the detergent may get mixed in with
the water running through the Alkaline Ionizer
or the plated parts may be damaged or peel
off or the plastic parts may become damaged,
discolored or deformed.)
Ʃ Use of cleansers may also impair the
workings of the outlet pipe and cause trouble.
Do not use brushes or other implements made
of metal (since they may leave scratch marks).
Do not use a tool to tighten up the nut (since the
nut may be damaged).
Important
ZGS0TK7585HKE0Z.indb 61ZGS0TK7585HKE0Z.indb 61 2009/12/09 9:51:062009/12/09 9:51:06
To Next Page
Loading...
