Panasonic TK7585-SHK - Names of the Parts and Steps to Take before Operation

9
Names of the Parts and Steps to Take Before Operation
Hose strap
Acidic water spout
 Acidic water will come out while the Alkaline Ionizer is producing
alkaline ion water. (Use it to wash dishes, vegetables, etc.)
Water supply hose
(length: approx. 90 cm)
Faucet
(not included)
Main unit
LCD display
Steps to take before operation
Operation (see pages 34 to 36)
▼
Run alkaline ion water through the Alkaline
Ionizer for about 3 or 4 minutes
(to expel the air inside the main unit)
 “Preparation time” blinks for about 20
seconds on the LCD display.
Measuring the pH level (ion concentration)
(see pages 26 and 27)
8
6
Installing the Alkaline Ionizer
(see pages 18 to 21)
3
Attaching the bypass
selector
(see pages 12 to 17)
2
Connect the power plug
to the power outlet
(see page 21)
4
Checking the faucet
(see page 11)
1
Control panel
(see page 53)
Main
spout
Bypass
selector
Acidic water stand
(with drain outlet)
Drain outlet
Acidic water and drain hoses
(length: approx. 60 cm)
Suction
disc
Water quality selector
buttons (see page 34)
Power cord
(length: approx. 3 m)
Power plug
Outlet pipe (length: approx. 45 cm)
Selecting the language of
the LCD displays
(see page 29)
5
Check that no water is leaking and also that
water is coming out of the main spout and
acidic water spout (see pages 24 and 25)
7
ZGS0TK7585HKE0Z.indb 9ZGS0TK7585HKE0Z.indb 9 2009/12/09 9:50:152009/12/09 9:50:15