65
3
4
Open the faucet, and
run water through the
Alkaline Ionizer (for about 3 or
4 minutes).
༌ᖛ㕻ㆊŊ
⩕ᖛⳇ⳧㋤
ņ₎3Ɯ4Ӡ⾝Ň
When water is run through the Alkaline
Ionizer, “Preparation time” blinks for about
20 seconds on the LCD display.
While water is running through the Alkaline
Ionizer, check that water is not leaking from
the area where the cartridge was installed
and that water is coming out of the drain
outlet.
ⳇᖛᆹŊȵЈʑȶㆴḻሳᥨ 20 ấȯ
ⳇᖛʑŊ⦼ው᳖ഺᡇൔ↲ⵒӠሳʃሳភ
ᖛŊഺᖛםʑ⦓ᆯ؋ሷᙟӛᖛȯ
LCD display
ᇘㆴḻ
▼
Reset completed screen
Ś⸅ᅘ⥑હરᯃᯉㄇŜ
Cartridge life display
ŚᡇൔلㆴḻŜ
Drain outlet
ᖛם
Press
(for about 3 seconds).
ྈ
⸹
ņ₎ 3 ấ⾝Ň
The “Reset completed” screen appears,
and about 3 seconds later the “Cartridge
life” display appears.
Refer to the displays on the right, and
check whether the balance cartridge
life has been reset correctly.
ȵ⸅ᅘ⥑હરᯃᯉㄇȶㆴḻŊ₎ 3 ấരŊ⩐
ໞȵᡇൔلㆴḻȶȯ
⦼א〇ⲩ⤟⦦Ŋ⦓ᡇൔلᔌ⡕⸅ᅘ
⥑હȯ
Continued on next page/ʁㅪ
ZGS0TK7585HKE0Z.indb 65ZGS0TK7585HKE0Z.indb 65 2009/12/09 9:51:092009/12/09 9:51:09