Panasonic TX-PR42C10 - 4 Specifications

8
4 Specifications
Power Source AC 220-240 V, 50 / 60 Hz
Power Consumption 285 W
Power Consumption in Standby mode 0.7 W
Display panel
Aspect Ratio 16:9
Visible screen size 106 cm (diagonal) 922 mm (W) × 518 mm (H)
Number of pixels 786,432 (1,024 (W) × 768 (H)) [3,072 × 768 dots]
Sound
Speaker 160 mm × 40 mm × 2 pcs, 6 Ω
Audio Output 20 W ( 10 W + 10 W ), 10 % THD
Headphones M3 (3.5 mm) stereo mini Jack × 1
Receiving Systems / Band name
PAL B, G, H, I, SECAM B, G, SECAM L, L’
VHF E2 - E12 VHF H1 - H2 (ITALY)
VHF A - H (ITALY) UHF E21 - E69
CATV (S01 - S05) CATV S1 - S10 (M1 - M10)
CATV S11 - S20 (U1 - U10) CATV S21 - S41 (Hyperband)
PAL D, K, SECAM D, K
VHF R1 - R2 VHF R3 - R5
VHF R6 - R12 UHF E21 - E69
PAL 525/60 Playback of NTSC tape from some PAL Video recorders (VCR)
M.NTSC Playback from M. NTSC Video recorders (VCR)
NTSC (AV input only) Playback from NTSC Video recorders (VCR)
O TV signals may not be received in some areas.
Aerial - Rear VHF / UHF
Operating Conditions
Temperature: 0 °C - 35 °C
Humidity: 20 % - 80 % RH (non-condensing)
Connection Terminals
AV1 (Scart terminal) 21 Pin terminal (Audio/Video in, Audio/Video out, RGB in, Q-Link)
AV2 (Scart terminal) 21 Pin terminal (Audio/Video in, Audio/Video out, RGB in, S-Video in, Q-Link)
AV3
VIDEO RCA PIN Type × 1 1.0 V [p-p] (75 Ω)
S-VIDEO Mini DIN 4-pin Y:1.0 V [p-p] (75 Ω) C:0.286 V [p-p] (75 Ω)
AUDIO L - R RCA PIN Type × 2 0.5 V [rms]
COMPONENT
VIDEO Y 1.0 V [p-p] (including synchronization)
P
B
, P
R
± 0.35 V [p-p]
AUDIO L - R RCA PIN Type × 2 0.5 V [rms]
Others
HDMI1 / 2 TYPE A Connectors HDMI™ (Version 1.3a with x.v.Colour™)
O This TV supports [HDAVI Control 4] function.
Card slot SD Card slot × 1
Output
AUDIO L - R RCA PIN Type × 2 0.5 V [rms] (high impedance)
Dimensions (W × H × D) 1,029 mm × 709 mm × 327 mm (With Pedestal)
1,029 mm × 661 mm × 100 mm (TV only)
Mass 28.0 kg Net (With Pedestal)
26.0 kg Net (TV only)
Note
• Design and Specifications are subject to change without notice. Mass and Dimensions shown are approximate.
• This equipment complies with the EMC standards listed below.
EN55013, EN61000-3-2, EN61000-3-3, EN55020, EN55022, EN55024.
• Pedestal: ST-42RF1WG / ST-50RF1WG (For safety approval)