x Previously run the cables from the wall or ceiling through the cable access hole.
c Mount the attachment onto the mount bracket.
Recommended tightening torque: 0.78 N·m {0.58 lbf·ft}
Camera attachment
FRONT
TOP
Note:
• For wall mounting:
Installation shall be performed in such a manner that "MTOP" of the camera attachment faces
upward. (Except for the case of connecting the conduit from the top. (+ page 29))
• For ceiling mounting:
The front side (model number indication face) of the camera shall be aligned in the direction of
the arrow in "<FRONT" on the camera attachment.
• Ensure that any one of the arrows on the mount bracket is aligned with the arrow of "MTOP" on
the attachment.
To Next Page
