Panasonic WV-CW504F

39
Specifications
• Basic
Power source: 24 V AC 60 Hz, 12 V DC
Power consumption: 24 V AC: 3.4 W (without heater unit)
14 W (with heater unit)
12 V DC: 280 mA*
Ambient operating temperature: –10 °C to +50 °C {+14 °F to +122 °F}
–30 °C to +50 °C {–22 °F to +122 °F}**
Ambient operating humidity: Less than 90 % (no condensation)
Water resistance: Camera: IEC60529 (IP66)***
Shock resistance: 50J, IEC60068-2-75
Video output: VBS: 1.0 V [p-p]/75 Ω, NTSC, BNC connector
Dimensions: WV-CW504F: ø154 mm x 145.5 mm (H)
{ø6-1/16" x 5-3/4" (H)}
WV-CW504S: ø164 mm x 146 mm (H), 191.5 mm (Base Cover)
{ø6-7/16" x 5-3/4" (H), 7-9/16" (W)} (Base Cover)
Weight: Main body: 1.35 kg {2.98 lbs.}
(including camera attachment 100 g {0.22 lbs.})
Mounting bracket
(only for WV-CW 504S, WV-504SK): 350 g {0.78 lbs.}
Finish: Main body: Aluminum die cast, light gray
Dome cover: Clear polycarbonate resin
* When using 12 V DC power supply, the optional heater unit is unavailable.
** With heater unit WV-CW5H (option)
*** Applicable only when the installation and waterproof process are done properly.
• Camera
Image sensor: 1/3 inch interline transfer CCD
Effective pixels: 976 (H) x 494 (V)
Scanning area: 4.8 mm (H) × 3.6 mm (V) {3/16" x 5/32"}
Scanning system: 2:1 interlace
Scanning frequency: Horizontal: 15.734 kHz Vertical: 59.94 Hz
Synchronization: INT (internal sync)/VD2/LL* (Power supply synchronization)
* Phase adjustable
Resolution: Horizontal: 650 TV lines typ. (color mode)
700 TV lines or more (BW mode),
Vertical: 350 TV lines or more (at center)
Minimum illumination: When using clear dome cover:
Color Mode: 0.1 lx {0.01 footcandle} at F1.4 WIDE
0.003 lx {0.0003 footcandle} (sensitivity up x32,
at F1.4 WIDE)*
BW mode: 0.01 lx {0.001 footcandle} at F1.4 WIDE
0.0003 lx {0.00003 footcandle} (sensitivity up
x32, at F1.4 WIDE)*
When using smoke dome cover (option):