Panasonic WV-CW504F - Page 26

26
v To perform fine adjustment of the back focus after the ABF operation indicator
goes off and automatic back focus is adjusted, use the right or left button.
Note:
 • Nooperationfor10secondsormoreautomaticallyclearsthefocuspositionindicator.
 • Tochangetheangle ofview by movingthe zoomadjustment ring,also movethe focus lock
knob to adjust the focus.
 • Theoriginallyadjustedfocusmaybeslightlyoffdependingontheirisstateresultingfromthe
focal depth of the lens. In such a case, open the aperture by darkening the subject as much as
possible in the same way of taking picture, and then adjust the focus. Defocus can be prevent-
ed.
 • Use of "ABF" of "BACK-FOCUS" in the setup menu (+ Operating Instructions (PDF)) allows
users to adjust the focus optimally in the range of the capability to automatically follow the vari-
ation in illuminance.
 • Theout-of-focuslevelinthenear-infraredlightregionmaybehigherthanthatinthevisiblelight
region.
Setting "C/L ↔ B/W" of "BACK-FOCUS SETUP" to "AUTO" or "PRESET" in the setup menu
(+ Operating Instructions (PDF)) allows users to adjust the focus in both the near-infrared light
and visible light regions (The variation in illuminance is not followed after focus adjustment.).