Panasonic WV-S3511L - Network Connection Setup; Connecting via PoE Hub

19
PoE device (hub)
*Use an Ethernet cable (category 5e or better, cross) when directly
connecting the camera to a PC.
When connecting to a network using a PoE hub
Before starting the installation, check the entire system configuration. The following illustration gives
a wiring example of how to connect the camera to the network via a PoE device (hub).
IMPORTANT:
⿟Use a switching hub or a router which is compliant with 10BASE-T/100BASE-TX.
PC
Ethernet cable
(category 5e or better, straight)
Ethernet cable
(category 5e or better, straight)
Ethernet cable
(category 5e or better, straight)