Panasonic WV-S4550LPJ

Questions and Answers

C
Claudia BakerAug 17, 2025
What to do if SD ERROR indicator lights red on Panasonic WV-S4550LPJ?
- H
  Heather KellyAug 17, 2025
  If the SD ERROR indicator lights red on your Panasonic Security Camera, it might be due to the write protect switch on the SD card being set to “LOCK”. Unlock the write protect switch of the SD memory card. Also, if the SD memory card was formatted on a PC, use an SD memory card formatted on the camera. Finally, the SD memory card might be faulty, so replace it with a normal one.
S
Samantha CruzAug 20, 2025
Why does audio input contain noise in Panasonic Security Camera?
- Z
  zowensAug 20, 2025
  If your Panasonic Security Camera's audio input contains noise, check the grounding of the camera, switching hub, or peripheral devices. Also, consider the camera's placement, as using it near an electrical power line can cause noise. If the camera is near a device producing a strong magnetic field or radio waves, use a powered microphone or connect audio output with low output impedance.
T
Todd RobinsonAug 23, 2025
How to fix a Panasonic Security Camera that is not turning on?
- M
  Maria StoneAug 23, 2025
  If your Panasonic Security Camera is not turning on, especially when using a PoE (Power over Ethernet) device, verify that the connection is properly established. If you're using a DC power supply, make sure the power plug is firmly connected and check the AC adapter specifications.
B
Breanna WongAug 26, 2025
What to do if LINK indicator does not light on Panasonic Security Camera?
- H
  Heather LopezAug 26, 2025
  If the LINK indicator on your Panasonic Security Camera does not light up orange when the Ethernet cable is connected, ensure that the Ethernet cable is properly connected. Also, check if the hub or router you are using is functioning correctly. If the issue persists, try replacing the Ethernet cable with a different one.
W
William SimpsonAug 28, 2025
How to fix a Panasonic WV-S4550LPJ when the power is not turned on?
- J
  Jose BartlettAug 28, 2025
  If your Panasonic Security Camera is not turning on, and you're using a PoE (Power over Ethernet) device for power, check that the connection is properly established. If you're using a DC power supply, make sure the power plug is firmly connected.
C
Carl HammondAug 30, 2025
What to do if LINK indicator does not light in orange on Panasonic Security Camera?
- A
  April WhiteAug 31, 2025
  If the LINK indicator on your Panasonic Security Camera doesn't light up orange when the Ethernet cable is connected, ensure the Ethernet cable is correctly connected. Also, verify that the hub or router you are using is operating correctly. If the problem persists, try replacing the Ethernet cable with a different one.
M
Matthew HenrySep 2, 2025
What to do if SD ERROR/ABF indicator lights red on Panasonic WV-S4550LPJ Security Camera?
- M
  Monica BrownSep 2, 2025
  If the SD ERROR/ABF indicator lights red on your Panasonic Security Camera, it could be due to several reasons. First, ensure that the write protect switch on the SD memory card is unlocked. If it is locked, unlock it. Second, if the SD memory card was formatted on a PC, use an SD memory card formatted on the camera. Finally, the SD memory card might be faulty, so try replacing it with a normal one.
D
David PorterSep 5, 2025
Why does my Panasonic WV-S4550LPJ audio input contain noise?
- T
  Tammy DavisSep 5, 2025
  If you are experiencing noise in the audio input of your Panasonic Security Camera, there are several potential causes. Ensure the camera, switching hub, and any peripheral devices are properly grounded. If the camera is near an electrical power line, move it away. Similarly, relocate the camera if it's near devices producing strong magnetic fields or radio waves, such as TV/radio antennas, air conditioning system motors, or transformers. You may also use a powered microphone or connect audio output with low output impedance.
T
thomashamiltonSep 8, 2025
What to do if SD ERROR/ABF indicator lights red on my Panasonic WV-S4550LPJ?
- J
  jessicamahoneySep 8, 2025
  If the SD ERROR/ABF indicator lights up red, it could be due to several reasons: * The write protect switch of the SD memory card is set to “LOCK”. If this is the case, unlock the write protect switch. * The SD memory card was formatted on a PC. Use an SD memory card formatted on the camera instead. * The SD memory card is faulty. Replace it with a normal one. * You may need to install the software to format the SD memory card on the PC.
A
Ashley HenrySep 12, 2025
How to fix Panasonic Security Camera when power is not turned on?
- F
  fmillerSep 12, 2025
  If your Panasonic Security Camera is not turning on, here are a few things to check: * If you're using a PoE (Power over Ethernet) device, make sure the connection is properly established. * Ensure the power plug is firmly connected. * Verify the AC adapter specifications are correct.

Panasonic WV-S4550LPJ Specifications

General

Camera Type	Network Camera
Maximum Resolution	1920 x 1080
Frame Rate	60 fps
Focal Length	2.8 mm
Maximum Aperture	F2.0
IR Distance	30 m
Audio Input/Output	1 Input / 1 Output
Ethernet	10Base-T / 100Base-TX
Power Source	PoE (IEEE802.3af)
Power Consumption	Max. 6.5 W
Ingress Protection	IP66
Vandal Resistance	IK10
Effective Pixels	2 Megapixels
Lens Type	Fixed Lens
Day/Night	Auto (ICR)
Shutter Speed	1/30 to 1/10000 s
Wide Dynamic Range (WDR)	Yes
Video Compression	H.264
Audio Compression	G.726
Protocols	IPv4, IPv6, TCP, UDP, HTTP, HTTPS, SMTP, DNS, RTP, RTSP, DHCP, SNMP, IEEE 802.1X
Edge Storage	MicroSD/SDHC/SDXC card slot
Operating Temperature	-40 °C