Panasonic WV-S6130

16
IMPORTANT:
• Use the tripod screw hole only when
installing the camera upside-down on a
desk top with a camera tripod.
• Do not use a tripod screw to mount the
camera on the ceiling since the fall pre-
vention measure is unavailable.
【Bottom view】
①
②
Tripod screw hole
(1/4-20 UNC for tripod: Depth 6 mm {1/4 inches})
Note:
S6130
The direction of Panasonic logo plate can be
changed.
① Push “P” on the right of the Panasonic logo
plate (refer to the illustration of【Front view】
in Parts and functions) to unlock and pull it
out.
② Pull the Panasonic logo plate out a little
and rotate it by 180°.
③Push the Panasonic logo plate to lock it
again.
S6130